FREQUENCY
8.2–12.4 GHz
INSERTION LOSS
< 0.5 dB
VSWR
< 1.5:1
WAVEGUIDE
WR-90
Low loss, low VSWR
Under 0.5 dB insertion loss with VSWR below 1.5:1.
Pairs with WR-90 antennas
Feeds the AntenX SGH-WR90, EHA-WR90, and OEWG-WR90.
Designed in the USA
Designed, assembled, and tested in California.
Product Details
The SMA-WR90 is an X-band coax-to-waveguide adapter that transitions an SMA female coaxial connector to a WR-90 (UG-135/U) waveguide flange across the full 8.2 to 12.4 GHz band. It uses a square-flange, right-angle feed in a rugged all-metal body, with low insertion loss and low VSWR, making it a clean interface between coaxial test equipment and WR-90 waveguide components. It pairs directly with the AntenX WR-90 antenna line and serves as the reference adapter used to specify those antennas.
- SMA female to WR-90 (UG-135/U) coax-to-waveguide transition covering the full 8.2 to 12.4 GHz X-band waveguide range.
- Low insertion loss (typ 0.3 dB, under 0.5 dB) and VSWR below 1.5:1 (typically below 1.2:1).
- Rugged all-metal aluminum body with a stainless-steel SMA female connector; handles up to 20 W.
- Pairs directly with the AntenX WR-90 antenna line: SGH-WR90, EHA-WR90, and OEWG-WR90.
- Designed, assembled, and tested in California.
Specifications
General
| Design | Square flange, right-angle feed |
| RF connector | SMA female (stainless steel) |
| Waveguide interface | WR-90, UG-135/U flange |
| Impedance | 50 Ω |
| Maximum input power | 20 W |
| Construction | Machined aluminum, painted finish |
| Dimensions (L × W × H) | 47 × 41 × 31 mm (1.8 × 1.6 × 1.2 in) |
Performance over frequency
| PARAMETER | FREQUENCY | TYP | MAX | UNIT |
|---|---|---|---|---|
| VSWR | 8.2 – 12.4 GHz | 1.2 | 1.5 | – |
| Insertion loss | 8.2 – 12.4 GHz | 0.3 | 0.5 | dB |
Specifications are typical and subject to change without notice.
